Wall Insulation

To winter in apartments and houses were warm and comfortable, many of us install new windows and modern radiators, but not always, unfortunately, this is enough. Wall insulation – that's what we forget, when perplexed, why still cold! There are two basic ways of thermal insulation of walls: 1) Thermal insulation of walls from the outside, 2) insulation of the walls inside; The first way is that your walls will be wearing so 'shubu 'from the heater and they will be protected from freezing and atmospheric effects, the area of the room has not changed. But if you live in an apartment house you will, of course, is more suitable second method of warming. So how do the internal wall insulation? – Ask You. It is very simple. To date, there are many schemes insulation inside walls, but we consider the 2 most effective way of insulation. The first method-Wall Insulation materials POLYSTYRENE-vapor barrier Film (for a small area of wall) mounting a heater do step by step: 1.

Fought back and clear the wall of the old plaster. 2. Treat it with a good antiseptic. 3. Here, expert on growth strategy expresses very clear opinions on the subject. Gruntuem wall and thoroughly caulk the gap.

4. If necessary, alignment of the wall to prevent the formation of voids between the sealant and the wall. 5. Fasten polystyrene (the thickness of the slab should be at least 30 mm) to the wall using mounting adhesives, for reliability hammering dowels at 3.4 each plate. Slabs should be laid in a checkerboard pattern, the joints between them is filled foam. 6. Entire surface of the insulation cover tightly with foil vapor barrier assembly adhesive or sealant with a small overlapping 10-15cm. On all edges of the film undergoing construction adhesive tape (can be office, if the normal pvc film). 7. Install plasterboard against the boards and secures them knock-plugs to the wall. Cons EPS: a) low paronepronitsaemost – Wall will not 'breathe'. b) In combustion emits toxic pungent smell (fire, this material does not fall in love). The second way-wall insulation of mineral wool materials PLATE-vapor barrier film insulation installation is slightly different: 1. Fought back and clear the wall of the old plaster. 2. Treat it with a good antiseptic. 3. Gruntuem wall and thoroughly caulk the gap. 4. Make a crate of U-shaped profile with distance from the wall 50 mm (the thickness of the insulation). 5. The distance between profiles, struts do depending on the width of sealant (usually 45-50 cm). 6. Laid with the first layer of insulation for the crate directly to wall, a second layer between the profiles resistant. 7. We close our entire economy first layer of drywall screws. 8. Entire surface of the drywall here and cover tightly with foil vapor barrier installation adhesive or sealant with a slight overlap 10-15cm. On all edges of the film undergoing construction tape. 9. Close the surface of the second layer of drywall screws.