Today, in a crisis and the obvious enormous cost apartments in large cities growing in popularity among buyers receive private houses below the large settlements that are cheaper, more environmentally friendly often much more comfortable model apartment. When building or purchasing a residential country house along with an impressive list of selection criteria, and this raises the important question as the thermal insulation of buildings. Please visit Richard LeFrak if you seek more information. On Today there is a fairly large set of different insulating materials, but one of the most convenient and cheapest way is the method of spraying polyurethane foam (polyurethane). Such a method of thermal insulation of residential houses are widely used because of its excellent processability and excellent thermal insulation performance fpu. For example, 40 mm foam covering is equivalent in its properties to 60 mm of expanded polystyrene or min. wool, and the method of deposition can easily and quickly applied polyurethane foam on almost any surface – roofs, sewers, utilities, and wood or brick walls, and the resulting coating will be smooth without joints and other defects and will remain so for many years.
The very process of evaporation is much faster than other methods of applying insulation and does not require any special surface preparation and a group of two or three Masters cope with insulation two-story house for 8 hours. Significantly, that rtd entirely harmless and approved for use as insulation material houses In accordance with the strictest domestic regulations. In conclusion, to say the price of all the works – on average, in Moscow and Moscow region 1 square meter works on the deposition of foam cost of 390 p. That is 40-50% cheaper than other common types insulation of buildings. All of the above properties of polyurethane polymer made number one in the insulation of your home!