Industrial Heating

reduce the diameter of the fuel line is not allowed. When mounting, pay attention to the required distance of 30 or 60 mm above the filter cover needed for replacement filter element. Caution: When cleaning the plastic sump is permitted to use only clean diesel. All other types of detergents or solvents, particularly those containing alcohol, may lead to damage to the plastic fuel filter separator 2000 are installed on cars depending on engine capacity. 1. up to 300 horsepower installed fuel filters SEPAR-2000 / 5, 2. up to 600 horsepower and above installed fuel SEPAR-2000/10 filters Fuel filters SEPAR-2000 heater located inside the sump heater efficiently heats the fuel flow, melting the wax catching.

Thus possible to avoid clogging of the filter. Heating control is automatic thermostat, which includes heating at temperatures below about +5 C and off at a temperature of about +10 C. This means that even with the heater at fuel temperature greater than about +10 C and heating system is not working. Functioning heating is determined by the ignition control light in the active position of the heater. In emergency cases, when casting temperature greater than about +80 C heating off a thermal fuse, located inside the filter housing on a single board with a control relay. Insertion of a filter with heater is carried out according to instructions installation, connection warming – according to the wiring diagram shown below. To connect the filter is heated: Filters and swk swk 2000/5/50/N 2000/10/N heated only when the engine / alternator.

The heating system included turning tumbler with a control light. When you stop the engine heating system is automatically disabled. According to a survey conducted by Association of dae (German Association of Engineers) fuel filter SEPAR-2000 as the best among the fuel filter cleaning and separating systems in civil and commercial vehicles among those represented in the European market. Also, SEPAR-2000 recognized as a leader in the tests among Industrial fuel-systems in the category 'Transportation and single-stage filtering of fuel and its components'. Tests are presented in the annual report of association, issued a mandatory basis in Analytical Edition DEKRA-TEST. This report has been submitted for review in early December 2005. Separ-2000 – provides a reliable engine start in the winter! Avtobilistam many familiar problems starting the engine in freezing temperatures. The solution to this problem may be the use of Separ-2000 with the heater. Separ-2000 – fuel filter and water separator, effectively clearing fuel from water and dirt. Model with a heater in addition to these benefits will also provide reliable engine starting in winter. The filter used in 44 countries. Successfully installed on the cars: Scania, Volvo, Tatra, Kamaz, Maz, etc. Filter is equipped with most of Caterpillar machinery, etc. Separ-2000 – it's the German quality, proven in Russian conditions. testing and certification Certificate din iso 9002 tuv of North Rhine-Westphalia, Germany Department of vehicular traffic frg German Technical Department of the Navy Certificate of Germanischer Lloyd Lloyd's Certificate of English Certificate of the French Bureau Veritas Certification Italian rina Russian gost R certificate